dsc06845

TruFlow™ 24D

truflow 24d topdresser earth and turf main image copy

The TruFlow™ 24D is a push-type topdresser designed for operators to get into tight areas and spread dry topdressing materials. The design is simple: a four wheel stance, with the forward two wheels for power, and the rear wheels for transport.

Fill the unit with dry topdressing material and tip it on its back two wheels to move it without spreading. When you arrive at the area you want to topdress, set the unit down on all four wheels and begin to push it. The forward wheels begin turning the dispersal drum and spread the material onto the surface in an even 22-24″ width.

The TruFlow™ 24D is designed to spread materials with up to 20 percent moisture content.  Baseball coaches use 24D to spread infield mix on their baselines and for spot repairs on the turf areas. Synthetic turf installers use the 24D to spread sand and crumbed rubber on putting greens and for doing finish work on larger sports fields.

Request a Quote
truflow 24d topdresser earth and turf main image copy

The TruFlow™ 24D is a push-type topdresser designed for operators to get into tight areas and spread dry topdressing materials. The design is simple: a four wheel stance, with the forward two wheels for power, and the rear wheels for transport.

Fill the unit with dry topdressing material and tip it on its back two wheels to move it without spreading. When you arrive at the area you want to topdress, set the unit down on all four wheels and begin to push it. The forward wheels begin turning the dispersal drum and spread the material onto the surface in an even 22″ side pattern.

The TruFlow™ 24D is designed to spread materials with up to 20 percent moisture content.  Baseball coaches use 24D to spread infield mix on their baselines and for spot repairs on the turf areas. Synthetic turf installers use the 24D to spread sand and crumbed rubber on putting greens and for doing finish work on larger sports fields.

Request a Quote
dsc05879aa
dsc05882aa
dsc06845
earth and turf truflow 24d inside dispersal drum
earth and turf icon 1

What it spreads:

The TruFlow 24D only spreads material that has a moisture content below 30%. A few materials commonly spread by the 24D include: infield mixes for baseball fields, calcined clay, sand, and crumbed rubber.

earth and turf icon 2

Powered By:

You provide all the power needed to operate this machine. As you push it, the forward wheels power the dispersal drum that distributes the topdressing that you are spreading.

earth and turf icon 3

Who uses this machine?

The TruFlow™ 24D has a wide variety of users from baseball coaches and maintenance (NY Mets), synthetic turf installers, and broiler farmers to spread drying agents on wet chicken litter.

Standard Features

earth and turf features forward drive wheels

Ground Drive System:

The front wheel ground drive provides a positive drive for the dispersal drum.

earth and turf features adjustable end gate

Adjustable End-Gate:

The adjustable end-gate allows you to easily control the amount of material being applied.

earth and turf features four wheel stance

Four Wheel Stance:

The four wheel stance allows you to easily switch between transport and spreading materials.

earth and turf truflow 24d inside dispersal drum

Large Hopper:

The 3 cu. ft. hopper on the TruFlow 24D makes sure that you can spread for longer periods of time.

Specifications

Capacity:
Max Weight:
Box Width:
Box Length:
Total Height:
Total Width:
Total Length:
Spread Width:

3 cu. ft. (0.08 m3)
375 lbs. (170 kg)
25.1 inches (63.8 cm)
20.1 inches (51 cm)
39.3 inches (99.7 cm)
36.8 inches (93.5 cm)
35.8 inches (90.9 cm)
24 inches (61 cm)

Spread Thick:
Spread System:
Weight w/ Tires:
Tire Size:
Movement:
Drive:
Required Power:
Build:

Up to 0.5 inches (1.3 cm)
Drum & Drop
130 lbs. (59 kg)
Drive 4.80×4.00-8 (Transport: 4.00-6)
Walk Behind/Push
Ground Drive (Single Wheel)
Not Applicable
12/16 Ga. Bolted Steel, 2-Part Epoxy

Specifications

Capacity:
Max Weight:
Box Width:
Box Length:
Total Height:
Total Width:
Total Length:
Spread Width:

3 cu. ft. (0.08 m3)
375 lbs. (170 kg)
25.1 inches (63.8 cm)
20.1 inches (51 cm)
39.3 inches (99.7 cm)
36.8 inches (93.5 cm)
35.8 inches (90.9 cm)
24 inches (61 cm)

Spread Thick:
Spread System:
Weight w/ Tires:
Tire Size:
Movement:

Drive:

Required Power:
Build:

Up to 0.5 inches (1.3 cm)
Drum & Drop
130 lbs. (59 kg)
Drive 4.80×4.00-8 (Transport: 4.00-6)
Walk Behind/Push
Ground Drive (Single Wheel)
Not Applicable
12/16 Ga. Bolted Steel, Industrial Powder Coat