Push-Type Topdresser
The TruFlow™ 24D is a push-type topdresser designed for operators to get into tight areas and spread dry topdressing materials. The design is simple: a four wheel stance, with the forward two wheels for power, and the rear wheels for transport.
Fill the unit with dry topdressing material and tip it on its back two wheels to move it without spreading. When you arrive at the area you want to topdress, set the unit down on all four wheels and begin to push it. The forward wheels begin turning the dispersal drum and spread the material onto the surface in an even 22-24″ width.
The TruFlow™ 24D push-type topdresser is designed to spread materials with up to 20 percent moisture content. Baseball coaches use 24D to spread infield mix on their baselines and for spot repairs on the turf areas. Synthetic turf installers use the 24D to spread sand and crumbed rubber on putting greens and for doing finish work on larger sports fields.
Request a Quote
What it spreads:
The TruFlow 24D only spreads material that has a moisture content up to 30%. A few materials commonly spread by the 24D include: infield mixes for baseball fields, calcined clay, sand, and crumbed rubber.
Powered By:
The push-type topdresser only needs you to push it. The forward wheels provide the power to turn the rotating drum and spread your topdressing material the width of the machine.
Who uses this machine?
The TruFlow™ 24D has a wide variety of users from baseball coaches and maintenance (NY Mets), synthetic turf installers, and broiler farmers to spread drying agents on wet chicken litter.
Standard Features
Ground Drive System:
The front wheel ground drive provides a positive drive for the dispersal drum.
Adjustable End-Gate:
The adjustable end-gate allows you to easily control the amount of material being applied from this push-type topdresser.
Four Wheel Stance:
The four wheel stance allows you to easily switch between transport and spreading materials.
Large Hopper:
The 3 cu. ft. hopper on the TruFlow 24D makes sure that you can spread for longer periods of time.
Specifications
Capacity:
Max Weight:
Box Width:
Box Length:
Total Height:
Total Width:
Total Length:
Spread Width:
3 cu. ft. (0.08 m3)
375 lbs. (170 kg)
25.1 inches (63.8 cm)
20.1 inches (51 cm)
39.3 inches (99.7 cm)
36.8 inches (93.5 cm)
35.8 inches (90.9 cm)
24 inches (61 cm)
Spread Thick:
Spread System:
Weight w/ Tires:
Tire Size:
Movement:
Drive:
Required Power:
Build:
Up to 0.5 inches (1.3 cm)
Drum & Drop
130 lbs. (59 kg)
Drive 4.80×4.00-8 (Transport: 4.00-6)
Walk Behind/Push
Ground Drive (Single Wheel)
Not Applicable
12/16 Ga. Bolted Steel, Industrial Powder Coat