Multispread 220

The MultiSpread™ Model 220 is available in two-wheel ground drive or a hydraulic drive version. This topdresser utilizes the “widespread beater” system and will spread wet or dry materials. The MultiSpread™ 220 can be pulled with a lawn and garden tractor, ATV, utility cart, compact diesel tractor, small articulated tractors, and zero-turn mowers.

The MultiSpread™ Model 220 topdresser is only 45 inches wide, so it can go through gates and around trees, shrubs, and narrow areas while still spreading material up to 60″ wide. Our customers include landscape contractors, lawn care professionals, golf courses, schools, universities, cemeteries, municipalities, parks & recreation facilities, sports turf managers, and synthetic turf installation and maintenance companies. Check out the features and benefits of our simple, well-built design…

MultiSpread 220 Features & Benefits:

Ground Drive System

The Dual Wheel Ground Drive system provides for a positive drive for the belt and beater.

Adjustable Tongue

The tongue has five adjustment holes to accommodate a variety of towing vehicles. The hitch tab pivots ensure the unit is following the contour of the turf.

Widespread Beater

Our patented “Widespread Beater” is designed to spread a variety of wet or dry materials up to 60″ wide.

Adjustable Engagement Lever

The Engagement Lever is adjustable to facilitate ease of use by the operator.

Adjustable Conveyor Belt

The belt is easily adjustable by loosening four nuts on the conveyor roller slide on each side and then adjusted using a single 1/2 “ bolt and nut system on each side


23″ wide PVC Belt delivers material evenly and smoothly to the “widespread beater.”

Adjustable Rear Shroud

The rear shroud is adjustable in four different positions to maximize or control the spread pattern.


Loading Chutes

The optional Loading Chutes increase the loading width to 63″ to reduce spillage when loading with a tractor loader.

Wing Kit

The optional Wing Kit allows operators to control the spread pattern by moving one or both wings inward

Light Material Sides

Increase the capacity to just above 1 Cu. Yd. Designed for use with light materials such as compost, crumbed rubber, and calcined clay. Fully loaded weight should not exceed 1,750 lb




Capacity: 15 cu. ft./0.42 m3 Max. Load Wt.: 1750 lbs/783 kg
Box Width: 23.5 in./59.7 cm Box Length: 73.5 in./186.7 cm
Total Height: 37.5 in./95.3 cm  
Total Width: 45 in./114.3 cm Total Length: 99.3 in./252.1 cm
Spread Width: Up to 60 in./152.4 cm Spread Thick: Up to 0.25 in./0.6 cm
Spread Syst.: Wide Spread Beater Wt. W/Tires: 580 lbs/263.1 kg
Tire Size: 20.5 x 8.0-10 Movement:  Pull-type
Drive: Ground Drive Double Wheel  Req. Power: 16 hp/12 kw
Build: 12/16 Ga. Bolted Steel Industrial Powder Coat Options:  Light Material Sides Adjustable/ Wing Kit /Loading Chutes

Get More Information or a Quote